We are NADCA certified Air Quality Specialists . Contact us for cleaning and disinfectant applications. Especially now with the Coronavirus pandemic
Air duct cleaning and sanitizing will remove unwanted dust along with micro organisms including mold spores, bacteria and viruses. All disinfecting products that we use EPA and CDC approved and found effective against human coronavirus Covid-19. UVC in duct disinfection units also available for residential and commercial facility.
Proper maintenance of your air ducts is a vital part of a home’s upkeep. It’s important to periodically check the condition of your air ducts to see if they need cleaning.
Consider having them cleaned if:
- You see mold growth inside hard-surface ducts or on other components of your heating and cooling system.
- Your air ducts are infested with vermin such as rodents or insects.
- Your air ducts are clogged with large amounts of dust and debris.
- You think duct cleaning might be a good idea for your home, talk to TNR. Our experts use professional equipment to clean your air ducts thoroughly and keep your air system running smoothly.
Air duct components that are not properly installed, maintained, or operated may become contaminated with particles of dust, pollen, or other debris.
To maintain clean air ducts:
- Change air filters based on the manufacturer’s recommendations.
- Vacuum regularly to help reduce pet dander, dirt, and debris.
- Get your carpets and hard-surface floors professionally cleaned regularly.
Glenview IL residential NADCA negative air method and how its done
1. We arrive at your home or business fully uniformed and equipped with truck or trailer mounted gas powered cleaning systems that guarantees strong vacuum pressure all through out the system plus there will be no dust filtered through out your home at the time of cleaning.
2. Before any work is done we do complete system inspection first then we will provide you with complete report and a quote and explain in detail how we will clean your air duct system or air handling unit.
3. Our tools and air line are brought inside your home, average set up time from 20 to 45 min.
4. We cycle the furnace on and off to be sure it is working properly before working on the system.
5. If duct system has access panels from previous professional cleaning we will re use those , if there isn’t any access we will cut an access panel in the supply and return duct then we attach our hose that is connected to the gas powered vacuum outside. (Access panels are sealed after cleaning is complete.)
6. The evaporator coil is protected with a covering or sheet metal blank in order to prevent any debris or dust getting on the ac coil.
7. The filter is removed and a piece of sheet metal blank is inserted to increase suction and prevent debris from passing into the blower motor or any air handling parts of the unit.
8. The supply registers will be blocked and opened one a the time in order to route vacuum flow to this particular vent at that time, then vent cover is removed and entire vent line gets agitated with truck mounted wiper whip system.
9. Our flexible rod system with specialized whips is inserted into your vent openings to blast off any dust and debris on the inside of the branch ducts, all the way to the main ducts downstairs.
10. One-inch holes are drilled into the main duct system so we can insert our flexible rods inside the ducts. Using larger whips (up to 28 inches long) we agitate the main duct until no more dust and debris is left ones cleaning is completed this holes are plugged with certified air leak resistant plugs.
11. The process is repeated for the cold air return ducts and all of the parts of the air duct system A to Z.
12. The evaporator coil cover is removed and the coil is cleaned. The condensate drip pan is cleaned at the same time. (A dirty coil is 20% less efficient).*Done on as needed basis
13. The blower and blower compartment is cleaned.*Done on as needed basis The blower door is cleaned and replaced as well as the top furnace door.
14. The 10 inch holes are covered with a 12 inch sheet metal plate and screwed in place with sheet metal screws. Finally, metal foil tape is placed on the edges of the plate to prevent air loss. (Our goal is to increase the efficiency of your furnace not make it worse with air leaks).
15. All 1 inch holes are plugged with silver or black air tight plugs.
16. The sheet metal blank is removed and if available a new filter is replaced in the filter area.
17. We cycle the furnace on to be sure everything runs properly.
18. A sticker with our phone number is placed near the filter so you can see when the service was done and when it will be due in the future.
19. We clean up after ourselves and take up our hoses, tools and tarps and stow them in the truck.
20. We thank you for having Top Notch restore your air duct system so you can really breathe easier with clean ducts
Commonly Asked Air Duct Cleaning Questions; Insights from a Glenview Air Duct Cleaning Company
Cleaning the ducts of your HVAC system is important to maintaining the quality of the air in your home and the proper functioning of the system. Over time, the ducts will collect various contaminants including dust, bacteria, fungi, and even mold, and as the air circulates through the ducts, it cycles these contaminants through the home. This can have a detrimental effect on the health of the residents. Ducts may also become clogged, decreasing air flow and putting a strain on the various components of the HVAC system. This, if left unchecked, can lead to damage. The solution to this issue is engaging a professional Glenview air duct cleaning service, and in this article, we’re going to answer some of the most commonly asked questions we receive from our clients.
How often is the procedure required?
There are several factors that come into play here, and there is really no hard rule of thumb. Generally speaking, you should call in a contractor if you start to notice reduced air flow, strange smells in the home, your allergies flaring up, or a general low air quality. If you have a recurring HVAC maintenance plan, the Glenview air duct cleaning contractor will also make sure that the ducts are clean and unobstructed once or twice a year.
What does the procedure entail?
In order to clean the air ducts of a home, the contractor will use source removal methods, which create negative pressure within the system. This then helps the contractor remove the debris within the ducts using specialized devices.
Why does air duct cleaning lead to lower energy bills?
If your air ducts are not blocked, you will not see an immediate drop in your energy bills. However, over the long term, dirty ducts can take their toll on the system, and as the system goes under the effects of wear and tear, it becomes less and less efficient. This not only means that the lifespan of the system is shorter, it also means that as the system and its components reach the end of their life cycle, they will have to run longer and at a higher intensity to reach optimal comfort levels within the home. This, in turn, causes a spike in your energy bills.
How do I find the best Glenview air duct cleaning contractor for the job?
When looking for the best company for the project, it’s wise to go through several interviews and evaluations. The quotes will be based on the size of your system, and the layout of the ductwork. Quotes are generally free, and during the interview process, you’ll want to ask about certifications, the air duct cleaning method, and the equipment that will be used.
Want to find out more?
If you would like to find out more information, such as pricing and project timelines for air duct cleaning in Glenview, contact us today. With proper air duct maintenance, you can keep the air in your home clean and your HVAC system running smoothly. Our services are designed to be both thorough and affordable, and if you have any questions regarding the process, methods, and products use, we’d be glad to answer them. Do not let dirt, debris, and other nasty contaminants clog up your air ducts and create a mess in your home any longer!